Learn how to copy trades between MT5 accounts at different brokers, configure symbol mapping and check contract sizes, lot steps and receiver settings.
You can copy trades between MetaTrader 5 accounts at different brokers using Local Trade Copier EA MT5©, with the Transmitter and Receiver terminals running on the same Windows computer or regular Windows VPS.
Each Receiver can use its own symbol mapping, lot sizing and trade-management settings. This is useful when you want the same source trading activity to reach accounts with different balances or broker conditions.
A reliable setup starts with two checks: which Receiver instrument corresponds to the Transmitter symbol, and what trade exposure the Receiver volume represents. Matching the symbol name is only the first part.
Run a separate MT5 terminal for each account on the same Windows computer or VPS.
Configure Local Trade Copier EA MT5© as Transmitter on the source and Receiver on the destination.
Compare the exact symbol names and configure any required mapping on the Receiver.
Check the Receiver instrument's specifications and choose appropriate lot sizing.
Test entries, SL/TP changes and closures on demo accounts before relying on the setup.
For the full installation procedure, use the MT5-to-MT5 installation guide.
Open Market Watch in each MT5 terminal and locate the instrument you want to copy. Record the exact names, including punctuation, prefixes, suffixes and letter case.
For example, the Transmitter might use EURUSD, while the Receiver uses EURUSD.r. An index might appear as US500 on one account and SPX500 on another.
Do not choose an instrument only because its name looks familiar. Check its description and underlying market, particularly for indices, metals and futures-related products. A cash CFD and an expiring futures contract should not be treated as interchangeable simply because they refer to a similar market.
If the Receiver does not offer a suitable corresponding instrument, changing the mapping text cannot create one. Confirm availability with the broker before proceeding.
Local Trade Copier EA MT5© provides Transmitter/Receiver prefix and suffix inputs, plus Special Symbol mappings. Configure these in the Receiver EA, even when the input refers to the Transmitter's symbol name.
Use the following examples as separate cases:
Transmitter → Receiver
Configuration on the Receiver
EURUSD → EURUSD
No suffix adjustment required for these identical names
EURUSD.r → EURUSD
Transmitter dot-suffix mapping normally handles this automatically
EURUSD+ → EURUSD
Suffix of the Transmitter Account: +
EURUSD → EURUSD.r
Suffix of the Receiver Account: .r
EURUSD+ → EURUSD.r
Suffix of the Transmitter Account: +
Suffix of the Receiver Account: .r
US500 → SPX500
Special Symbol 1: US500,SPX500
Example Receiver configuration for EURUSD+ → EURUSD.r. Use the exact symbol names and suffixes shown by your own brokers.
The automatic Transmitter dot-suffix example is directional. EURUSD.r → EURUSD is different from EURUSD → EURUSD.r, where the Receiver suffix needs configuration.
For completely different names, enter the exact Transmitter symbol first and Receiver symbol second, separated by a comma. For example, if the brokers provide corresponding gold instruments named XAUUSD and GOLD, the mapping is XAUUSD,GOLD in an available Special Symbol field.
These are examples, not a list of instruments guaranteed to exist at every broker. Check your terminals and the Settings & Inputs Guide before entering your own values.
In each terminal, right-click the symbol in Market Watch → Specification. Compare contract size, price increments, permitted volume, trading sessions and margin conditions. MetaTrader's official Market Watch documentation explains the specification window.
Symbol mapping identifies the destination instrument. It does not standardize its trading conditions.
Suppose two hypothetical gold CFDs quote the same underlying gold price in USD per troy ounce, but their contract sizes differ:
Transmitter instrument: 100 ounces per lot.
Receiver instrument: 10 ounces per lot.
A 0.10-lot Transmitter position represents 10 ounces. A 0.10-lot Receiver position represents only 1 ounce. Matching 10 ounces on that hypothetical Receiver would require 1.00 lot.
This illustrates contract exposure, not a recommended trade size or a universal copier conversion formula. It assumes those contract units and price conventions. Check the actual broker specifications, account currency, stop distance, margin and costs before choosing volume.
The same lot number does not automatically mean the same financial risk. Conversely, increasing lots simply to match a contract-unit calculation may be inappropriate for a smaller Receiver account.
Local Trade Copier EA MT5© offers fixed, multiplier, proportional and risk-based sizing methods. Choose according to your objective:
Fixed Lot sets a defined Receiver volume for a controlled setup or test.
Multiplier scales the source volume using the configured multiplier.
Proportional methods relate volume to the selected account-size measure.
Risk per Trade methods use a Stop Loss and the selected risk amount or percentage.
Do not assume a balance ratio alone compensates for every difference in contract specifications. Verify the resulting Receiver volume and its exposure on the actual instrument.
Risk per Trade modes require the copied trade to have a Stop Loss. Under the documented behavior, later Transmitter SL changes can change Receiver risk, and removing the Transmitter SL closes the Receiver copied trade. A configured percentage is therefore not a guarantee of a fixed maximum realized loss.
For a broader explanation of independent Receiver controls, see using an MT5 trade copier as a risk-management layer.
Compare the Receiver's minimum volume and permitted volume step with the size you expect to copy. For example, a calculated 0.03-lot trade does not fit an instrument whose minimum volume is 0.10 lot.
Also review the EA's own volume limits. Minimum Receiver Lot Size can raise a calculated size to the configured minimum; it is not the same as Ignore Receiver Lot Size Below, which excludes a trade below its threshold. Check the Settings guide for the exact behavior of each input.
Symbol-specific rules must identify the correct Receiver name. For example:
If the destination is EURUSD.r, a Symbols to Copy filter should use EURUSD.r.
Custom Symbol Fixed Lot Sizes uses Receiver symbol names and applies with the Fixed Lot method.
Custom Symbol Multipliers also uses Receiver symbols and applies with its supported multiplier methods.
Mapping, filtering and sizing are separate controls. A correct mapping will not override an exclusion filter or an unsuitable volume setting.
Receiver execution prices can differ from the Transmitter's prices. Compare the intended SL/TP levels with the Receiver instrument and check how you want those levels handled.
For ordinary same-direction copying, Keep Original TP/SL Distances determines whether the copier preserves the original price levels or adjusts them relative to the Receiver's actual opening price. Use the Settings guide to select and test the appropriate behavior. Preserving a distance does not necessarily preserve monetary risk when contract specifications differ.
If you use pending orders, decide whether to copy the pending order directly or copy its resulting market trade after it triggers on the Transmitter. With direct pending copying disabled, market copying and the other rules must allow the resulting trade.
Two brokers can trigger corresponding pending orders at different times because their quotes differ. Include placement, modification and cancellation in your demo test rather than checking only the initial order.
An instrument can be available on both accounts while the Receiver cannot trade it at that moment. Check its trading session, account permissions and available margin.
The Receiver needs its normal trading login and permission to trade; an investor/read-only login cannot execute the copied instructions. Algo Trading must also be enabled as required by the setup.
When a request fails, inspect the Receiver's Experts and Journal tabs. A closed session, unsupported volume or rejected stop level requires a different response from an incorrect symbol mapping. Do not change several unrelated settings before reading the message.
Use the downloadable MT5 copier demo on demo accounts. It is fully functional for up to four hours at a time on demo accounts only.
Start with one Transmitter and one Receiver:
Confirm the terminals communicate and the Receiver follows the correct account number.
For fresh test trades, set Copy Current Trades = false, Copy New Trades = true and Copy Market Trades = true. Check the documented server-time offset if broker clocks differ.
Configure one symbol mapping and a small, valid demo volume. Check that filters and protection settings permit the test.
Open a new Transmitter trade and confirm the Receiver symbol, direction, volume and SL/TP behavior.
Modify SL/TP and test a full closure. Test partial closure if you use it and the volumes permit it.
Test the intended pending-order mode separately.
Close the test trades, record the results and repeat for the next instrument or Receiver broker.
Configure closure synchronization for the behavior you intend to test. Preserve relevant account protections; this procedure does not require disabling them.
For each Receiver, record its broker/server, exact symbol pair, mapping input, contract size, volume limits and selected lot-sizing method. Add the test result and any relevant log message.
This record is useful when you add a new account or revisit a setup later. Recheck the configuration rather than copying another Receiver's settings unchanged.
For expanding to several accounts, continue with how to copy trades between multiple MT5 accounts.
Different-broker MT5 copying works best when you verify the instrument, configure its mapping, select the intended exposure and test the trade lifecycle on each Receiver.
For MT5-to-MT5 copying, you need Local Trade Copier EA MT5©. The MT4 version is additionally needed only when the setup includes MT4 terminals. See the MT5 license and pricing options when you are ready to choose a version.
If an instrument still does not copy as expected, follow the MT5 trade copier troubleshooting guide or contact support with the exact symbol names, Receiver inputs and relevant log messages.
Whether you manage multiple personal accounts, funded accounts, or client portfolios, Local Trade Copier EA MT5© provides the flexibility needed to synchronize MT5 accounts efficiently. Professional lot management, intelligent trade filtering, customizable trade management, and comprehensive receiver account protection help create a reliable MT5 trade copying environment tailored to your own trading requirements.
⭐ MT5 to MT5 Copier Guides
Try the MT5 Trade Copier Free Demo
Test Local Trade Copier EA MT5© between two or more MetaTrader 5 demo accounts before purchasing. The free demo is fully functional for up to 4 hours at a time on demo accounts only.
For download links, installation instructions and the demo reset procedure, visit the Free MT5 Trade Copier Demo page.